Tail Group Material Kit, Balanced, Non-PMA'd

Kit includes:

FIN PARTS

1 - 4130 Trailing Edge Tube, 3/4” x .035 x 29-1/2”, 3’
1 - 4130 Stand Off, 5/8” x .035 x 4-3/32”, 1’
1 - 4130 Leading Edge Tube, 1/2” x .035 x 26-1/2”, 3’
1 - 1025 Rib #4, 1-3/4” x 15-1/2”, 20 gauge
1 - 1025 Channel, 3/8” x 3/8” x 19”
1 - 1025 Channel, 3/8” x 3/8” x 25-1/4”
2 - Washers AN970-3, 3/4” dia.
2 - 4130 Bushings, 1/2” x .065 x 3/8”, 1’
2 - 4130 Bushings, 3/8” x .065 x 3/8”, 1’
1 - 1025 Rib #4A, 1-3/4” x 25-3/8”, 20 gauge
1 - 4130 Bushing, 3/8” x .065 x 1”, 1’

RUDDER PARTS

1 - 4130 Trailing Edge Tube (pre bent), 3/8” x .028 x 95”
1 - 4130 Leading Edge Tube, 7/8” x .035 x 53-1/8”
1 - 4130 Doubler, 1” x .065 x 3”, 1’
1 - 1025 Rib #4, 1-7/8” x 15-3/4”, 24 gauge
1 - Rod, Brace, 3/32” dia. x 18-1/2”
1 - Rudder Horn, Precut
2 - 4130 Bushing, 1/2” x .065 x 3/4”, 1’
2 - 4130 Bushing, 3/8” x .065 x 3/4”, 1’
2 - 1025 Rib #3, 1-7/8” x 18-3/4”, 24 gauge
1 - 1025 Rib #2, 1-7/8” x 15-1/2”, 24 gauge
1 - 1025 Rib #1, 1-7/8” x 12-1/4”, 24 gauge

ELEVATOR PARTS W/JACK SCREW

2 - 4130 Leading Edge Tube, 7/8” x .035 x 62-5/8”
2 - 4130 Trailing Edge Tube, 3/8” x .035 x 96”
2 - 1020 Rib #3A, 2” x 17-11/16”, 22 gauge
2 - 1020 Rib #4, 2” x 14”, 22 gauge
2 - T920 Brace Wire, 3/32” x 21-1/2”
2 - T920 Brace Wire, 3/32” x 14-1/2”
2 - T920 Brace Wire, 3/32” x 12-1/4”
2 - 4130 Doubler, 1” x .049 x 2-1/2”
2 - Elevator Horn, Precut
4 - 4130 Bushings, 1/2” x .065 x 3/4”
4 - 4130 Bushings, 3/8” x .065 x 3/4”
2 - 1020 Rib #3B, 2” x 18”, 22 gauge
2 - 1020 Rib #3C, 2” x 14-3/4”, 22 gauge
2 - 1020 Rib #3D, 2” x 10-3/4”, 22 gauge

STABILIZER PARTS

2 - 4130 Leading Edge Tube, 1” x .035 x 50-1/2”
2 - 4130 Trailing Edge Tube, 7/8” x .058 x 51-1/8”
2 - 1020 Rib #3A, 1-3/4” x 26-1/8”, 22 gauge
2 - 1020 Chl. Brace, 3/8” x 3/8” x 14-1/4”, 22 gauge
2 - 1020 Chl. Brace, 3/8” x 3/8” x 15-5/8”, 22 gauge
2 - 1020 Chl. Brace, 3/8” x 3/8” x 25-5/8”, 22 gauge
8 - 1020 Gusset, 1-1/2” x 1-1/4”, 22 gauge
2 - 4130 Bushings,5/16” x .065 x 1”
8 - 4130 Bushings, 1/2” x .065 x 3/8”
8 - 4130 Bushings, 3/8” x .065 x 3/8”
4 - Washers, AN 970-3
2 - 1020 Rib #3B, 1-3/4” x 26-1/8”, 22 gauge
2 - 1020 Rib #3C, 1-3/4” x 22-3/4”, 22 gauge
2 - 1020 Rib #3D, 1-3/4” x 18”, 22 gauge
2 - 1020 Rib #3E, 1-3/4” x 13-1/4”, 22 gauge
1 - 3/4” Rudder Arm 

Code 8