Sportsman 2+2 Fuselage Materials Kit, Non-PMA'd

Includes materials for construction of the Sportsman 2+2 fuselage.

  1 - Fuselage Tailpost
  1 - Jackscrew Pedestal
  2 - Rear Spar Fittings 
  1 - pair, Rear Stab. Support
  1 - pair, Tailwire Fitting
  1 - Tailspring Attach Fitting
32 - 3/8” x 3/8” x 3/8” 22 Gauge Channel
  1 - Tailspring Clamp
  2 - Fuselage Handles 
  3 - 10’ Stringers
  2 - 8’ Stringers 
  4 - 12’ Stringers 
  1 - pair, Fairing Attach Channel 
  1 - .063 9’ x 18’ 4130 Sheet Steel
  5 - feet, 3/8” x .035 4130N Tube 
  1 - foot, 3/8” x .058 4130N Tube 
26 - feet, 1/2” x .035 4130N Tube
  1 - foot, 1/2” x .058 4130N Tube
  1 - foot, 1/2” x .065 4130N Tube
85 - feet, 5/8” x .035 4130N Tube 
  1 - foot, 5/8” x .049 4130N Tube 
  2 - feet, 5/8” x .058 4130N Tube 
  4 - 3/4” x .035 x 17’ (Longeron) 4130N Tube
44 - feet, 3/4” x .035 4130N Tube 
  2 - feet, 3/4” x .058 4130N Tube 
13 - feet, 7/8” x .035 4130N Tube 
  2 - feet, 7/8” x .058 4130N Tube 
32 - feet, 1” x .035 4130N Tube
15 - feet, 1” x .049 4130N Tube
  3 - feet, 1-1/4” x .058 4130N Tube 
  1 - foot, 3/4” x .058 Sq. Tube 4130
  1 - .050 4130 N 4” x 5” Sheet Steel
  1 - .090 4130 N 6” x 6” Sheet Steel
42 - Stringer Attach Clips
  2 - Upper Side Stringer Attach Brackets 
  1 - Top Stringer Attach Bracket
  2 - Preformed Birdcage Nose Tubes 
  5 - Window Frame Channels, 36”
  2 - Door Frame Channels FF
  1 - Door Frame Channel AA LH
  2 - Door Frame Channels BB
  2 - Door Frame Channels CC
  2 - Door Frame Channels D1-D1
  2 - Door Frame Channels D2-D2
  1 - Door Frame Channel E-E LH
  1 - Door Frame Channel E-E RH
  1 - Door Frame Channel H-H
  1 - Floorboard Front 34” x 29”
  1 - Floorboard Center 32” x 24”
  1 - Floorboard Rear 44” x 32”
  1 - Door Frame Channel AA RH
  1 - Front Spar Fitting, LH
  1 - Front Spar Fitting, RH
  2 - Front Spar Fitting Inserts 
  1 - 6” x 16” 16 Gauge Sheet Steel (floorboard tabs)
  1 - 9” x 18” 18 Gauge Sheet Steel (stringer brackets)
  4 - AN970-4 Washers 
  2 - U Brackets 
  2 - Outside Gear Brackets, LH
  2 - Outside Gear Brackets, RH
12 - 1.065 OD x .500 ID Washers 
  2 - Gear Fitting Bottom Plates 
  2 - Gear Fitting Middle Plates 
  2 - Gear Fitting Top Plates

Code 8